Yoke Digital PSA Inox Fall Arrest Anchor Point – Metric Thread – 1-2 Person WLL

Description

The Yoke Digital PSA Inox Fall Arrest Anchor Point is a high-performance stainless steel safety anchorage system designed to provide a secure connection point for personal fall protection equipment (PPE). Engineered for harsh environments where corrosion resistance and long-term durability are essential, the PSA-INOX-YEP combines forged stainless steel construction with a rotating anchor eye for maximum flexibility during use.

Designed for permanent outdoor applications, this stainless steel fall arrest anchor point provides reliable protection in environments exposed to weather, moisture and corrosive conditions. The 360° rotating eye allows the connection point to adjust naturally in the direction of loading, helping to improve user mobility while reducing unwanted stresses on the anchorage system.

Available in metric threaded versions from M12 to M20, the Yoke Digital PSA Inox Fall Arrest Anchor Point is suitable for one or two-person fall protection systems depending on the selected model.

Each anchor point features 100% Magnaflux crack detection on load-bearing components, complete traceability of forged parts and cap screws, and individual certification documentation to support inspection, compliance and safety management procedures.

Stainless Steel Fall Arrest Anchor Point for Outdoor Applications

The PSA-INOX-YEP has been specifically developed for applications where a standard steel anchor point may not provide sufficient corrosion protection.

Manufactured from forged stainless steel, it provides:

Enhanced corrosion resistance
Long-term durability in outdoor environments
Reliable performance in harsh conditions
Reduced maintenance requirements
Suitability for permanent external installations

Typical environments include exposed structures, coastal locations, industrial sites and areas where moisture or weather exposure is a concern.

Certified Personal Fall Protection Anchor Point

The Yoke Digital PSA Inox Fall Arrest Anchor Point is designed specifically as an anchorage point for personal protective equipment systems.

It has been tested and certified to recognised fall protection requirements including:

Tested in accordance with EN 795
Tested in accordance with TS 16415
Meets DIN EN 795 requirements
Meets DIN EN 50308 requirements
Meets OSHA 1926.502 requirements
Complies with DIN EN 365 requirements for the number of load-bearing persons
Meets German BG BAU requirements

The anchor point is approved for use as part of personal fall arrest systems where a certified and reliable attachment point is required.

360° Rotating Anchor Eye

The Yoke Digital PSA Inox Fall Arrest Anchor Point features a 360-degree rotating attachment eye, allowing the connection point to align with the applied load direction.

Benefits include:

Adjustable positioning during use
Improved freedom of movement
Reduced twisting forces
Better load alignment
Enhanced user safety

The rotating design allows the anchor connection to follow the user’s movement while maintaining a secure fall protection attachment.

Forged Stainless Steel Construction

Manufactured from high-quality forged stainless steel, the PSA-INOX-YEP provides excellent strength combined with superior corrosion resistance.

Quality assurance includes:

Forged stainless steel construction
100% Magnaflux crack detection on load-rated components
Fully traceable forged components
Individually traceable cap screw
Test certification supplied
High-visibility YOKE yellow powder-coated finish

This robust construction makes the anchor point suitable for demanding industrial and outdoor safety applications.

Tested for Fall Arrest Safety

Every Yoke Digital PSA Inox Fall Arrest Anchor Point undergoes comprehensive testing to ensure dependable performance in personal fall protection applications.

Testing includes:

Passed 22.2 kN per person load testing
Dynamic fall testing using 100kg and 150kg test masses
Testing according to EN 795 and TS 16415 requirements
Individual component traceability and certification

The product meets the requirements of the German BG BAU (Employer’s Insurance Association of the Building Industry), providing confidence for professional work-at-height applications.

Simple Metric Thread Installation

The PSA-INOX-YEP Fall Arrest Anchor Point is designed for simple installation using a suitable metric threaded mounting connection.

Available thread options include:

M12 x 1.75
M16 x 2.0
M20 x 2.5

Installation requires:

Correctly specified metric threaded hole
Suitable structural mounting location
Tightening to the recommended installation torque
Inspection by competent personnel before use
Available Working Load Limits / Person Ratings

The Yoke Digital PSA Inox Fall Arrest Anchor Point is available in the following configurations:

Item Number Person Rating Thread Size Torque
8-285-007 1 Person M12 x 1.75 10 Nm
8-285-015 1-2 Persons M16 x 2.0 30 Nm
8-285-023 1-2 Persons M20 x 2.5 70 Nm
Typical Applications

The Yoke Digital PSA Inox Fall Arrest Anchor Point is suitable for:

Outdoor fall protection systems
Construction site safety
Industrial maintenance access
Coastal and marine environments
Roof safety systems
Offshore and exposed installations
Engineering facilities
Manufacturing plants
Industrial platforms
Building maintenance
Work-at-height applications
Permanent and temporary PPE anchorage systems
Key Features
Stainless steel fall arrest anchor point
Suitable for 1-2 person fall protection systems
Metric threaded versions available
Designed for permanent outdoor applications
Rotates through 360°
Adjustable in direction of loading
Forged stainless steel construction
Corrosion-resistant design
Tested to EN 795 and TS 16415
Passed 22.2 kN/person load testing
Passed dynamic fall testing using 100kg and 150kg test masses
100% Magnaflux crack detection on load-rated components
Individually traceable forged parts
Traceable cap screw certification
High-visibility YOKE yellow powder coating
Meets DIN EN 795, DIN EN 50308 and OSHA 1926.502 requirements
Certified personal protective equipment anchorage point
Technical Specifications
Product

Yoke Digital PSA Inox Fall Arrest Anchor Point – Metric Thread

Model

PSA-INOX-YEP

Item Number

8-285

Thread Sizes

M12 x 1.75
M16 x 2.0
M20 x 2.5

Person Rating

1 Person
1-2 Persons

Movement

360° rotating anchor eye

Material

Forged stainless steel

Testing

22.2 kN/person load tested
Dynamic fall tested using 100kg and 150kg test masses
EN 795 tested
TS 16415 tested

Certifications & Standards

EN 795
TS 16415
DIN EN 365
DIN EN 50308
OSHA 1926.502
BG BAU requirements

Finish

YOKE yellow powder coating for high visibility

Traceability

Individually traceable forged components
Traceable cap screw
Test certification available

Installation

Requires correctly specified metric threaded mounting hole

Recommended tightening torque:

M12 – 10 Nm
M16 – 30 Nm
M20 – 70 Nm

Safety & User Instructions
Ensure the anchor point is installed into a suitable structurally approved mounting location.
Use only the correct metric threaded connection specified for the selected model.
Tighten the anchor point to the recommended installation torque.
Always inspect the anchor point before use for damage, wear, deformation or corrosion.
Do not exceed the approved number of users for the selected model.
Only use the anchor point with compatible personal protective equipment systems.
Ensure all fall protection equipment is inspected and maintained according to applicable regulations.
Suitable for permanent outdoor applications, but regular inspection remains essential.
Installation and inspection must only be carried out by competent personnel.
Replace any damaged or worn components immediately.
Do not use the anchor point for lifting loads; this product is designed specifically as a personal protective equipment anchorage point.